https://sobowidz-foundry.tripod.com/cast_iron_cast_steel_department/ - over 65 photos on 5 pages



tu ponad 200 zdjęć naszych odlewów : https://business.google.com/v/_/018013602351781760928/6b9e/_/album/
- over 200 photos of our castings

14.04.2025

NICKEL CASTINGS
Nickel base alloys e.g.
Alloy 657 - 2.4680 - G-NiCr50Nb,
NA22H - 2.4879 - G-NiCr28W,
Alloy 617 - 2.4663 - ISO NiCr22Co12Mo9, DIN NiCr23Co12Mo, ASTM UNS N06617, Inco 617, Ni-cro-fer 5520 Co, nickel-chromium-cobalt alloy
Alloy 601 - 2.4851 - NiCr23Fe,
Alloy 602CA - 2.4633 - NiCr25FeAlY,
2.4815 - EN G-NiCr15,
Nickel Alloy 689 / N07252,
Nickel Alloy 685 / N07001,
supperalloys, NICKEL ALLOY CASTINGS,
ASTM A494 CW12MW, UNS J30002,
ASTM A494 CW6M / UNS J30107, cast nickel,
ASTM A494 CU5MCuC,
ASTM A494 CX2MW,
ASTM A494 CY40 / UNS J06040,
ASTM A494 CZ100, UNS J02100,
ASTM A494 N12MV, UNS J30012,
ASTM A494 N7M, UNS J30007,
ASTM A494 CW6MC, UNS J26625,
ASTM A494 CW2M,
Nickel – Copper alloys :
ASTM A494 M30C, UNS J24130,
ASTM A494 M35-1, UNS J24135,
ASTM A494 M35-2, UNS J04020,
ASTM A494 M30H, UNS J24030,
BS 3071 NA1,
BS 3071 NA2,
BS 3071 NA3,
NiCr20Ti, Nimonic 75, Nicrofer 7520, AKN 20, EI 435,
NiCr20TiAl, AKNC, Nimonic 80A, Nicrofer 7520Ti,
NiCr15Fe, Inconel 600, Nicrofer 7216,
NiCr23Fe, Nicrofer 6023,
NiCo20Cr20MoTi, Nimonic 263, Nicrofer 5120CoTi, C-263,
NiCr20Co16TiAl, Nimonic 90, EN 2295,
NiCo20Cr15MoAlTi, Nimonic 105, EN 2180
NiCr15Co14AlMoTi, Nimonic 115,
alloy 625, NiCr22MoNb,
alloy 718, NiCr19NbMo,
MA754, LVN4,
B - 1900, MAR-M 246, MAR-M 247, LVN-9, ŽS 6K,
DELORO 15, DELORO 22, DELORO 40,
DELORO 50, DELORO 60, DELORO 625,
NISTELLE C, TRIBALOY T700,
Hastelloy C276 ® / UNS N10276, Hastelloy x ® / UNS N06002,
Monel 400 ® / UNS N04400, Monel M400 ® / UNS N04400, Monel R405 ® / UNS N04405
Monel K500 ® / UNS N05500, Inconel 600 / UNS N06600, Inconel 601 / UNS N06601, Inconel 718 / UNS N07718,
Incoloy 800 ® / uns N08800, Incoloy 800H ® / UNS N08810, Incoloy 800HT ® / UNS N08811,
EUZONIT B 2, EUZONIT C 4, EUZONIT G 60, EUZONIT G 4810, EUZONIT GX,
Nickel – Molybdenum,
Nickel – Chromium,
Nickel – Molybdenum – Chromium,
2.4060 / nickel NP2 according to Russian standard GOST,
in-738, inconel, nickel alloys,
invar 36 / 1.3912 / FeNi36 / Alloy 36 / UNS K93600 / EN Ni36
Nickelgussteile, zs6k, żs6k-wi, żs6k, żs6ugk, żs6kwi,
Galling resistant Nickel Alloy,
Non Galling Castings, ŻS-6U, ŻS6U,


COBALT CASTINGS
Cobalt Foundry. SAE UMCo-51.
cobalt alloy castings, UMCo 51,
UMCo-50, 2.4778, G-CoCr28, acc. to SEW 471, DIN 17465,
G-CoCr28W, UMCo20,
UMCo50 Nb, Skid riders for furnaces, furnace riders, UMCo50Nb,
UNS R30075 (ASTM F75, ISO 5832-4) Co-Cr-Mo Alloy,
Conicro 5010 W, Haynes 25,
Conicro 4023 W, Haynes 188,
Cobalt – Chromium, Co-Cr, cobalt casting alloys,
Cobalt – Chromium – Niobium, Co-Cr-Nb, Cobalt-Based Alloy Castings,
Cobalt – Chromium – Tungsten, Co-Cr-W, Alnico alloys, Al-Ni-Co, Alniko,
Cobalt – Chromium, Co-Cr, cobalt casting alloys,
Cobalt – Chromium – Niobium, Co-Cr-Nb, Cobalt-Based Alloy Castings,
Cobalt – Chromium – Tungsten, Co-Cr-W,
STELLITE 1, STELLITE 3, STELLITE 4, STELLITE 6,
STELLITE 12, STELLITE 20, STELLITE 21, STELLITE 31,
STELLITE 190, STELLITE 238, STELLITE 306, STELLITE 694,
STELLITE F, STELLITE SF1, STELLITE SF6, STELLITE SF12, STELLITE SF20,
TRIBALOY T400, TRIBALOY T800


TITAN CASTINGS
e.g. alloy 3.7031 according to DIN 17865


IRON CASTINGS as
- nodular iron (also called spheroidal graphite iron, SG-iron or ductile iron)
grades: EN-GJS-400-15, EN-GJS-500-7, GJS-600-3, GJS 700-2, GJS-400-18-LT, GJS-400-18-RT (GGG40.3) according to EN 1563 from medium frequency induction furnace,
- grey iron (EN-GJL-150, GJL 200, gray EN-GJL-250 according to EN 1561) from medium frequency induction furnace or cupola furnace

https://sobowidz-foundry.tripod.com/cast_iron_cast_steel_department/

( 60 photos on 4 pages)

- austenitic ductile cast iron e.g. Ni-Resist e.g. D2, D5S, D5, PN - ZlNi20Si5Cr3 - Nicrosilal / GG-NiSiCr20 5 3 ; Spheronic / GGG-NiSiCr20 5 2; Austenitisches Gusseisen - DIN EN 13 835 / DIN 1694; GJSA-NiCr30 3,
- silicon-molybdenum ductile cast irons SiMo heat resistant up to temperature 700*C e.g. EN-GJS-SiMo25-5. EN-GJS-SiMo30-7.
EN-GJS-SiMo35-5. EN-GJS-SiMo40-6. EN-GJS-SiMo40-10. EN-GJS-SiMo45-6. EN-GJS-SiMo45-10,
- ADI irons e.g. GJS 800-8 / EN-JS1100, GJS 1000, GJS 1200, GJS 1400-1 / EN-JS1130 / 5.3405 - DIN EN 1564:2012,
- vermicular cast irons GJV,
- other iron alloys on request
are moulded on moulding machines in boxes 30x40,40x50,50x60cm,40x70cm,80x80cm,80x100 & 100x100cm
(weight up to 150 kg) or manually (weight mainly up to 700 kg; length up to 300 cm; on special request up to 3000 kg)
- in furan resin bonded sand ( CT8 - CT12 according to ISO 8062, Resin Bonded Sand Castings ).
- in green sand ( CT12 - CT14 according to ISO 8062)
- in dry sand or in self-hardening masses,
- in oiled red sand


STEEL CASTINGS

- heat resistant cast steels, heat proof, creep resistant castings

e.g. 1.4848 (G-X40CrNiSi25-20) according to DIN 17465, Skids, Furnace Riders,
1.4859 (GX 10NiCrNb32 20) acc. to DIN 17465,
1.4506 (X5NiCrMoCuTi20 18) acc. to SEW400,
1.4857 (X5CrNiMoNb25 25) acc. to DIN 8556,
X10CrAlSi25, EN DIN NF BS 10095 - SUH 446 JIS G 4312 max temp.1200°C,
1.4859 - GX10NiCrNbSi32-20 - ASTM CT 15C,
1.4848 - GX40CrNiSi25-20 - ASTM HK 40,
1.4857 - GX45NiCrSi35-25 - ASTM HP 40,
1.4868 - GX50CrNiSi30-30,
1.4889 - GX45NiCrNbSiTi45-35 - ASTM 35/45 , GX40NiCrNb45-35,
heat resisting alloys, and nickel-base alloys. superalloys,
heat resistant steel castings acc.to GB/T 20878, DIN 17440, DIN 17224, AISI, ASTM, JIS SUH35,
NF A35- 572/584, BS970, BS1449, ISO 683/13.
alloys for use with High Temperatures,
acc. to BS 3100 / BS3100 / BS3100:1991 :
420C24, 452C11, 452C12, 302C35,
309C30, 309C40, 310C45, 311C11,
330C12, 331C60, 334C11, 309C32,
309C35, 310C40, 330C11, 331C40,
and many other heat resistant alloys and creep resistant steels
G-X30CrSi6 - 1.4710 Max Anwendungs-Temp. 800°C,
G-X40CrSi17 - 1.4740 Max Anwendungs-Temp. 900°C,
G-X40CrSi23 - 1.4745 Max Anwendungs-Temp. 950°C,
G-X40CrNiSi27 4 - 1.4823 Max Anwendungs-T. 1050°C,
G-X40CrNiSi22 9 - ~1.4826 Max Anwendungs-T.1000°C,
G-X40CrNiSi25 12 - ~1.4837 Max Anwendungs-T.1100°C
1.4848 (G-X40CrNiSi25-20) DIN 17465
1.4859 (GX10NiCrNb32 20) DIN 17465
1.4506 (X5NiCrMoCuTi20 18) SEW400
1.4857 GX40NiCrSi35-26
X5CrNiMoNb25-25 DIN 8556
G-X160CrSi30
EN 10295
G-X30CrSi6 - 1.4710 max temp.800°C wg EN 10295,
G-X40CrSi17 - 1.4740 max temp. 900°C,
G-X40CrSi23 - 1.4745 max temp. 950°C,
G-X40CrNiSi27-4 - 1.4823 max temp.1100°C,
G-X40CrNiSi22-9 - ~1.4826 max temp.1000°C,
G-X40CrNiSi25-12 - ~1.4837 max temp.1100°C
G-X40CrSi28 - 1.4776
G-X160CrSi30
GX160CrSi18 - 1.4743 DIN EN 10295 max temp.900°C,
GX25CrNiSi18-9 - 1.4825 EN 10295 max temp.900°C,
GX40CrNiSiNb24-24 - 1.4855 EN 10295 max 1050°C,
G-NiCr28W - 2.4879 DIN EN 10295 max temp.1150°C,
G-CoCr28 - 2.4778 DIN EN 10295 max temp.1200°C,
G-NiCr50Nb - 2.4680 DIN EN 10295 max temp.1050°C,
G-NiCr15 - 2.4815 DIN EN 10295 max temp.1100°C,
DIN 17465:
G-X40CrSi29
G-X25CrNiSi18 9
G-X25CrNiSi20 14
G-X30CrNiSiNb24 24
G-X45NiCrSi35 25
G-X40NiCrNb35 25
G-X40NiCrSi38 18
G-X40NiCrSiNb38 18
1.4729 GX40CrSi13
1.4740 GX40CrSi17
1.4745 GX40CrSi24
1.4776 GX40CrSi28
1.4777 GX130CrSi29
1.4806 GX40NiCrSi35-17
1.4807 GX40NiCrSiNb35-18
1.4823 GX40CrNiSi27-4
1.4825 GX25CrNiSi18-9
1.4826 GX40CrNiSi22-9
1.4832 GX25CrNiSi20-14
1.4837 GX40CrNiSi25-12
1.4849 GX40NiCrSiNb38-19
1.4852 GX40NiCrSiNb35-25
1.4855 GX40CrNiSi
1.4857 GX40NiCrSi35-25
1.4859 G-X10NiCrSiNb32-20
1.4865 G-X40NiCrSi 38-18
EN 1.4869 / GX50NiCrCoW35-25-15-5,
1.4823 GX40CrNiSi27-4, 1.4825 GX25CrNiSi18-9, 1.4826 GX40CrNiSi22-9, 1.4832 GX25CrNiSi20-14, 1.4837 GX40CrNiSi25-12, 1.4848 GX40CrNiSi25-20, 1.4849, GX40CrNiSiNb38-18, 1.4852, GX40CrNiSiNb35-25, 1.4854, X6NiCrSiNCe35-25, 1.4855, GX30CrNiSiNb24-24, 1.4857 GX40CrNiSi35-25, 1.4859 G-X10NiCrSiNb32-20
1.4865 GX40CrNiSi38-18, 1.4869 GX50NiCrCoW35-25-15-5
1.4874 GX50NiCrCo20-20-20, UMCo20,
1.4889 GX40NiCrNb45-35
2.4778 / G-CoCr28, EN 2.4680 / G-NiCr50Nb, G-CoCr28W,
astm grades:
HF = 19% Chromium, 9% Nickel,
HH = 25% Chromium, 12% Nickel,
HI = 28% Chromium, 15% Nickel,
HK = 25% Chromium, 20% Nickel, ASTM Grade HK, 25Cr-20Ni, J94224, 1.4848,
HE = 29% Chromium, 9% Nickel,
HT = 15% Chromium, 35% Nickel,
HU = 19% Chromium, 39% Nickel,
HW = 12% Chromium, 60% Nickel,
HX = 17% Chromium, 66% Nickel,
HC = 28% Chromium 4% Nickel,
HD = 28% Chromium, 5% Nickel,
HL = 29% Chromium, 20% Nickel,
HN = 20% Chromium, 25% Nickel,
HP = 26% Chromium, 35% Nickel,
HG10MnN = 19% Chromium, 12% Nickel, 4% Manganese / 19Cr-12Ni-4Mn, J92604, Cast Stainless Steel,
ASTM Standards :
A297 / A297M – Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application, A297/A297M,
A217 / A217M Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
A351 / A351M Specification for Castings, Austenitic, for Pressure-Containing Parts
A370 Test Methods and Definitions for Mechanical Testing of Steel Products
A447 / A447M Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
A781 / A781M Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A957 Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A216 / A216M Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
A352 / A352M Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A487 / A487M Specification for Steel Castings Suitable for Pressure Service
A488 / A488M Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
A703 / A703M Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
A802 / A802M Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
A985 / A985M Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
E165 Practice for Liquid Penetrant Examination for General Industry
E709 Guide for Magnetic Particle Testing

- carbon and construction cast steels

carbon, carbon manganese steel castings.
alloys A1, A2, A3, A4, A5, A6 (according to standard BS 3100).
GS 38, GS 45, GS 52, GS 60, GS 70 (acc.to DIN 1685),
GP240GH (EN 10213), GS20Mn5 (EN 10213-3),
GS42CrMo4, GS25CrMo4, GS30Mn5 (DIN 17205),
GS16MnCr5 (DIN 17182),
GS30CrMo4 (TGL 14395),
cast steels for use at low temperatures
low alloy steel castings.
AL1, AL2, AL3, BL2 (standard BS3100),
AM1, AM2, AW1, AW2, AW3 (standard BS 3100),.

- stainless cast steels

1.4031 (X38Cr13), 1.4301 (X5CrNi18 10) DIN 17440
1.4308 (G-X6CrNi18 9), 1.4313 (G-X5CrNi13 4) DIN 17445
1.4340 (G-X40CrNi27 4) SEW410
1.4408 (G-X6CrNiMo18 10), 1.4410 (G-X10CrNiMo18 9), 1.4853 (X10CrNiMoNb18 12) DIN 17445
1.4542 (X5CrNiCuNb17 4) DIN 17440
1.4729 (G-X40CrSi13) DIN 17465
G43200 AISI 4320
CF8M ASTM A351
SS-stal 2343-12 SS 142343
316, 304C15, 316C16, 317C16 - BS3100,
ACI - ASTM CK20 - J94202,

- abrasion proof cast steels. tool steels, abrasive and erosive wear

L210H21NM, L210H21, L210H21S (wg PN-90/H-83161)
L120G13 (wg PN-88/H-83160)

BS - British Standard Specifications - Steel Castings produced to BS standards:

BS3100 Steel castings for general engineering purposes.
BS1504 Steel castings for pressure service.

BS3100 Carbon Steel A1, A2, A3
BS3100 Carbon Manganese Steel A4, A5, A6
BS3100 Carbon Steel - high magnetic permeability AM1, AM2
BS3100 Carbon Steel - for surface hardening AW2, AW3
BS3100 Carbon Steel - for case hardening AW1
BS3100 Carbon Steel - for low temperature use AL1, AL2, AL3
BS3100 Low Alloy Steel - for low temperature use BL2
BS3100 Cr and CrMo Steel for elevated temperature use B1, B2, B3, B4, B5, B6, B7,
BS3100 Low Alloy Steel - higher tensile BT1, BT2, BT3
BS3100 Low Alloy Steel - abrasion resistance BW2, BW3, BW4,
BS3100 Cr and CrNi for corrosion resistance 410C21, 420C28, 420C29, 425C12, 425C11,
BS3100 Austenitic Cr/Ni for corrosion resistance 302C25, 304C12, 304C15, 347C17,
BS3100 Austenitic Cr/Ni/Mo for corrosion resistance 316C12, 316C16, 317C16, 318C17,
BS3100 High Ni Cr for corrosion resistance 332C11, 332C13, 332C15
BS3100 High Alloy Steels for use at high temperatures.
420C24, 452C11, 452C12, 302C35, 309C30, 309C40, 310C45, 311C11, 330C12,
331C60, 334C11, 309C32, 309C35, 310C40, 330C11, 331C40,

- other cast steel alloys on request
are moulded on moulding machines in boxes 30x40,40x50,50x60cm,40x70cm,80x80cm,80x100 & 100x100cm (weight up to 150 kg) or manually (weight mainly up to 700 kg;
length up to 300 cm; on special request for lower quantities up to 3000 kg)
- in dry sand or in self-hardening masses,
- in no-bake phenol resin sand, in alphaset process.


BRONZE CASTINGS
- as sand castings (machine or hand moulded)
- as centrifugal bushings,rings and sleeves up to 1000 mm diameter and up to 1000 mm long
- as lost-wax investment castings - mainly art castings
from our fine art foundry department: sculptures,
statues,monuments,objects of art,busts,figurines,statuettes
(animals,women,nudes,ancient art),
reliefs,decorative panels,medals,business souvenirs,
crosses and other devotional items, also
resin sculptures with bronze dust on request
https://sobowidz-foundry.tripod.com/art_castings_kunstguss/ ( 47 photos on 4 pages)
https://sobowidz-foundry.tripod.com/art_casting_poland_en.htm
e.g.
such cast bronze alloys as
BS 1400: LG1, LG2 (Gun Metal), PB1, G1, LB2, AB1, AB2, G3, LG4, CT1, CT2,
PB4, PB2, LPB1, LB1, LB4, LB5
SAE 660,
ISO CuSn10, CuSn10P, CuSn10Zn2,
CuSn10Pb10, CuSn8Pb15Ni, CuSn5Pb20,
CuSn4Zn7Pb6, CuSn5Zn5Pb5,
CuAl9Fe3, CuAl10Fe3Mn2, CuAl10Fe4Ni4, CuAl10Fe5Ni5,
ASTM B148 C95800,
CuSi3Zn3Mn1,
CuSn12Ni2-C Din3996:2005
and other bronze alloys on request
unit weight mainly up to 500 kg and length up to 300 cm;
on special request up to 3000 kg)


ALUMINIUM CASTINGS
(AlSi12, AlSi12Fe, AlSi12Cu, AlSi12CuFe, AlSi5Cu3Mg
AlSi10Mg, AlSi60Cu4, AlSi132, alloys according to
SAE e.g. A380 or ASTM or BS e.g.LM6, LM20, LM25, LM21, LM4,
LM16, LM10 and other alu alloys on request) are made
- on cold-chamber high pressure die casting machines (weight 0,05-5,0 kg),
- in gravity dies / chills (up to 50 kg open manually or by gravity die machines)
or
- in sand (up to 250 kg;up to 250 cm long; on special request up to 600 kg).


BRASS CASTINGS are made
- on cold-chamber die casting machines
- in permanent moulds
or
- in sand.
Also centrifugal castings and lost-wax investment castings (art castings too - brass statues)
e.g.such cast brass alloys as
BS1400: DCB3, DCB1, HTB1, HTB3, SCB1, SCB3, SCB4, SCB6, PCB1
ISO CuZn40, CuZn40Pb, CuZn39Pb2, CuZn38Pb2,
CuZn25Pb3Sn2, CuZn33Pb2, CuZn36Sn,
CuZn15As, CuZn34Pb2AlAs,
CuZn35AlFeMn, CuZn28Al5FeMn, CuZn38Al2Mn1Fe, CuZn34Al
CuZn43Mn4Pb3Fe, CuZn37Mn4Fe1Sn1, CuZn40Mn3Fe1,
CuZn38Mn2Pb2, CuZn16Si3,5
and other cast brass alloys on request
weight mainly up to 500 kg and length up to 300 cm;
on special request up to 2500 kg)


Additionally available: ZINC (Zn99,5%, ZnAl4 known as ZP3 / Zamak 3 or AG40A and ZnAl4Cu1 known as ZP5 / Zamak 5 or AG41A), LEAD (mainly up to 3000 kg).

We give inspection certifications 3.1 (EN 10204,DIN 50049,chemical composition of cast,strength tests,hardness,elongation)

Casting cores are made with use of carbon dioxide, resins (Cold box amina) or Hot Box.
Steel shot blasting, glass or sand blasting.
Painting works (spray & dip painting, powder coating) and special coatings (Zn,Cr,Ni,Cd).
Heat treatment: T4, T5, T6, T7, +QT quenching & tempering, +N normalizing, +NT, +T; hardening, tempering;
annealing (normalizing, stress relieving / recovery / process anealing, full anealing, softening, spheroidising),
precipitation hardening, martempering, austempering, T6 for aluminium castings;
Castings patterns are made of wood, resins or aluminium.
Production of gravity dies and high pressure dies.
Machining & welding.Assembly. Constructions.

SUPPLIED INDUSTRIES:
- metalurgy (Skid riders for melting furnaces, furnace riders for steel works, ingot dies)
- power industry (dust elbows, flame stabilizers, burners),
- automotive (brackets, intercoolers, housings, steps for trucks, gearboxes, turbocharger housings),
- lighting (lampposts,housings,brackets),
- marine, offshore, shipbuilding & yacht building (propellers, heads, liners, pistons, exhausts, intake manifolds for engines, ballasts, keels & bulbs, counterweights, anodes),
- machine building (housings, gearboxes, shafts, bars, thickwalled tubes, sleeves, bushings, flywheels, flat bars,round bars, compressor parts),
- building engineering (drillheads for foundation poles, castings for lifts/elevators; excavator and loader spare parts: excavator teeth loader bucket teeth; concrete mixing plant spare parts: blades, lining, spokes ; paving plant spare parts: blades, blade grips),
- public works (bridge railings,river balustrades, road barriers)
- mining (mine spare parts: runners, road and gear wheels, brake blocks; abrasion resistant buckets; spare parts for jaw crushers, cone crushers, impact crushers and hammer crushers: brake lining, lateral wedges, bearing ribs,hammers, crusher lining, bronze liners, cast iron liners, plastics liners fuse and strut plates),
- railway engineering (e.g.couplings, brake holders, brake inserts),
- for pulp and paper industry
- agriculture machines (e.g.wheels, gearboxes, housings, bushings, covers, counterweights, packer wheels, Cambridge rollers, Crosskill rollers, Campbell rollers; Niemeyer Wendepacker d 900 mm,Lemken etc.),
- industrial fittings & pumps,pipe fittings,valves, pipe couplings,pipe clamps,water sewage systems, manhole covers,manhole stairs,gully grates (standard EN-124), watermeter bodies,compressors,
- windpower-plants (covers, housings, parts of transmission sectors: main-bearing houses, rotorshafts, gearbox supports, bearings)
- furniture (furniture fittings and costruction fittings, door handles),

More than 40% of our production is exported to other European countries, North America, Middle East, Japan and Australia. For all customers in European countries which belong to EEC, EFTA or CEFTA we sell all our products as V.A.T.-free (VAT 0%). Since 1997 export promotion of SOBOWIDZ has been co-financed from the European Union funds within PHARE Programme. Within coming 2 years our company is going to get Quality System Certificate for the Standard ISO 9002:2000.

Village Sobowidz (Sobbowitz) is situated 30 km to the south of Gdansk
(1000 year city and Baltic Sea harbour in northern Poland).
Geographical position GPS: 18°35'58.20" E & 54°08'44.68" N
Everyday direct connections by Lot, SAS, Wizz Air, Lufthansa, Ryanair from international Gdansk airport
to such cities as Warsaw, Copenhagen, Frankfurt, Berlin, Stockholm, London...
http://www.airport.gdansk.pl Our export office is situated only 5 km from the airport. GPS: 18°33'59.47" E & 54°22'34.59" N.
Everyday ferries between Gdynia & Karlskrona (Sweden) and between Gdansk & Nynashamn (near Stockholm).

We speak English (preffered) and German.
Delivery time: from 1 day up to 6 weeks for full container loads
depending on type of products
Delivery terms (Incoterms 2011): EXW, FOB, DAP or others.
We can offer our customers competitive freight to every place in the world.

Please send inquiries and proposals of appointment by fax or e-mail.
Technical drawings by e-mail please send as files .dwg, .dxf (drawings with dimensions),
.stp, .stl (3D drawings),
.jpg, .pdf, .igs or .tiff (photos & drawings).
.doc (texts).
We help to choose the best alloy for customer's casting, please describe enviroment of work for casting (forces, temperature, pressure...).

Well written inquiry helps us to give you quicker quotation. Perfect if your RFQ includes:
- drawing with all or at least overall dimensions or photos of old product,
- quantity,
- choosen metal / alloy,
- unit weight (kg or lbs) or volume of casting (cm3),
- info about finish of castings,
- info about patterns/tools/dies (ready to rent or new to quote and make).

We invite to co-operation! Try our prices and quality.

To contact us:
https://sobowidz-foundry.tripod.com/contact_us_en.htm

HOLIDAYS in Poland e.g. in 2015: New Year's Day 1st Jan., Epifaneia Day of 3 Kings 6th Jan., Easter 5th & 6th April, May Day 1st May, Constitution Day 3rd May, Corpus Dei 4th June, Assumption Day & National Holiday 15th Aug., All Saints Day 1st Nov., Independence Day 11th Nov., Christmas 25th & 26th Dec.


About our engineering castings in Deutsch at:

https://sobowidz-foundry.tripod.com/giesserei.html

KOKILLENGUSSTEILE - SANDGUSSTEILE - DRUCKGUSSTEILE

KUNSTGUSSTEILE / FEINGUSS

ALUMINIUMGUSS - STAHLGUSS - SPHAEROGUSS & GRAUGUSS

BRONZE - MESSING - BLEIGUSS - ZINK - KOBALT - TITAN

Hitzebestaendiges Stahlguss, Korosionsfestes Stahlguss, Edelstahlguss,

Nickelguss, Nickelgiesserei, Kobaltgiesserei, Kobaltguss, Kobaltgussteile, Nickelgussteile, Verschleissfestes Stahlguss,

Grosse Sandgussteile in Aluminium, Sandguss, Grossguss,

bearbeiteter guss, guss mit bearbeitung, cnc mechanische bearbeitung,

CNC Gussbearbeitung - Polen - Nickel Foundry, Giesserei, Fonderie, Fonderia, Gieterij, Gjuteri, Fundicion

žáruvzdorné slitiny, žáropevné slitiny, Vysokoteplotní slitiny, Žáropevné kobaltové slitiny, Slitiny niklu, Slitiny kobaltu, Lopatky, slitina, creepové vlastnosti, odolnost proti oxidaci, Žáropevnost, jezdce z kobaltové slitiny, nickelguss,
odlewy niklowe, odlewy stopów niklu, stopy niklu, odlewy kobaltowe, odlewy stopów kobaltowych, stopy kobaltu

https://sobowidz-foundry.tripod.com/barreaux_mobiles_grilles.html https://sobowidz-foundry.tripod.com/Cobalt_Alloy_Castings_UMCo50.htm https://sobowidz-foundry.tripod.com/Handformguss_Polen_GGG_Alu.html https://sobowidz-foundry.tripod.com/Rostelemente_Chromstahlguss.html https://sobowidz-foundry.tripod.com/ruszta_rusztowiny_ruszty_Cr.html https://iod.krakow.pl/wp-content/uploads/2018/02/Realizacji-projektu.pdf
http://sobowidz-odlewnia-staliwa-zeliwa-i-metali-kolorowych.business.site/
https://www.shipserv.com/supplier/profile/s/sobowidz-steel-iron-bronze-zinc-lead-foundry-235824
https://business.google.com/v/_/018013602351781760928/6b9e/_/album/
https://business.google.com/v/_/018013602351781760928/6b9e/_
https://business.google.com/v/_/018013602351781760928/6b9e/_/lp/
https://metaltop.pl/katalog-firm/odlewnia-zeliwa-i-metali-kolorowych-sobowidz-ludwik-bielinski
https://metaltop.pl/katalog-firm/odlewnia-zeliwa-i-metali-kolorowych-sobowidz-ludwik-bielinski/oferta
http://sobowidz-foundry-giesserei-odlewnia.business.site/





E-mail: sobowidz@wp.pl

Tel. 0048-663-390062 , 602-390062 - Fax +48-58-6828226
******************** (c) SOBOWIDZ 1983-2025 updated 19.04.2025